PVC Fittings
PVC pipe fittings — 45°/90° elbows, equal & reducing tees, couplings, female/male adapters, end caps, ball valves, stub flanges.
PVC 45° Elbow
PVC-U 45° elbow for smooth direction changes in pressure piping. Solvent-weld socket × socket per ASTM D2466 / ISO 1452-3. Lower friction loss than two 90° bends — ideal for water supply mains, irrigation manifolds and chemical lines. DN20 – DN400, PN10 / PN16.
View Details
PVC 90° Elbow
Standard PVC-U 90° elbow for direction changes in cold-water, irrigation, drainage and pressure piping. Solvent-weld socket × socket plus threaded BSP / NPT and mixed S × T versions per ASTM D2466 (Sch 40) / D2467 (Sch 80) / ISO 1452-3. DN20 – DN400, PN10 / PN16.
View Details
PVC Equal Tee
PVC-U equal tee for branching pipework in water supply, irrigation, fire-protection and industrial systems. Three identical sockets allow a 90° branch on the run. Solvent-weld and threaded versions per ASTM D2466 / ISO 1452-3. DN20 – DN400, PN10 / PN16.
View Details
PVC Reducing Tee
PVC-U reducing tee with smaller branch port — common for service drops on irrigation manifolds, sprinkler grids and water mains. Reduces fitting count and saves on couplings. Solvent-weld per ASTM D2466 / ISO 1452-3. DN20 – DN315 (run × branch), PN10 / PN16.
View Details
PVC Cross (4-Way Tee)
Four-way PVC-U cross fitting for grid sprinkler manifolds, fire-protection loops and irrigation distribution headers. Four equal solvent-weld sockets at 90° per ASTM D2466 / ISO 1452-3. Faster installation than two tees back-to-back. DN20 – DN200, PN10 / PN16.
View Details
PVC Coupling (Socket)
Straight PVC-U coupling — socket × socket — for joining two equal-diameter pipe lengths in water supply, irrigation, drainage and conduit systems. Centre-stop ensures even pipe insertion. Solvent-weld per ASTM D2466 / ISO 1452-3. DN20 – DN500, PN10 / PN16.
View Details
PVC Female Adapter (FAD)
PVC-U female adapter — solvent-weld socket on one end, female BSP or NPT thread on the other — for transitioning from PVC pipe to threaded male brass, steel or PVC fittings. Standard in irrigation, water service and pool / spa plumbing. DN20 – DN200, PN10 / PN16.
View Details
PVC Male Adapter (MAD)
PVC-U male adapter — solvent-weld socket on one end, male BSP or NPT thread on the other — for connecting PVC pipe into female-threaded valves, hose bibs or pump ports. Hex flats for spanner tightening. DN20 – DN200, PN10 / PN16.
View Details
PVC Reducer Bushing
PVC-U reducer bushing for stepping down from a larger pipe socket to a smaller one — saves a coupling and simplifies layouts where a tee or socket already exists. Spigot × socket pattern, solvent-weld per ASTM D2467. DN25 → DN20 up to DN500 → DN400, PN10 / PN16.
View Details
PVC End Cap
PVC-U end cap to close off a pipe end during pressure-testing, future tie-in stub-outs or permanent termination of branch lines. Solvent-weld socket and threaded female versions per ASTM D2466. DN20 – DN500, PN10 / PN16.
View Details
PVC Ball Valve
Manual PVC-U ball valve for shut-off in cold-water, irrigation, swimming-pool and chemical-handling lines. Quarter-turn lever, EPDM seals (FKM optional), single- or true-union body for in-line servicing. Sizes DN15 – DN100, PN10 / PN16.
View Details
PVC Stub Flange & Backing Ring
Two-piece PVC-U flanged connection: solvent-weld stub flange plus loose galvanised or stainless backing ring. Used to mate PVC pressure pipe to flanged pumps, valves, tanks or to steel piping. Drilling per ANSI 150 / EN 1092 / JIS 10K. DN50 – DN500, PN10 / PN16.
View DetailsProduct Catalogue FAQ
Questions about our product range
Sizing, customisation, MOQ and documentation — the most common pre-quote questions.
How many product lines does Primepoly offer?
41 products across 6 categories: HDPE pipes (10), HDPE fittings (6), PVC pipes (7), PVC fittings (12), hardware & machinery (5), PP fittings (1). New SKUs are added when market demand justifies it — typically 2–4 per year.
Can I order a custom OD, SDR, colour or marking?
Yes — we manufacture pipes and fittings to customer-specified OD, SDR, length, colour, marking and packaging. MOQ for OEM orders typically starts at 5 tons or one full container.
What is the minimum order quantity (MOQ)?
Standard MOQ varies by product: roughly 1 ton for HDPE pipe, 500 kg for PVC pipe, and one full container for export orders. Custom MOQ is available for sample or pilot projects — contact our sales team for confirmation.
Do products come with documentation?
Every shipment includes the mill certificate, hydrostatic test report, certificate of origin and the relevant ISO 4427 / AWWA C906 / WRAS / NSF 61 compliance documents. SGS / BV third-party inspection reports are available on request at the buyer's cost.
Can I get free samples?
Yes for low-DN PVC fittings and pipe-fitting samples. For HDPE pipe samples we typically ship a 0.5–1 m offcut at our cost; the buyer covers DHL / FedEx airfreight. Email sales@primepolypipes.com with the spec you want to sample.