CE / ANSI
American standards compliance
1 / 6
HDPE Pipes
HDPE Irrigation Pipe — Drip, Sprinkler & Buried Mains
HDPE irrigation pipe for drip, sprinkler and buried main lines — supplied as straight lengths, large coil rolls (100/150/200 m) and pre-perforated drip lateral. PE100 black with blue identification stripe, UV-stabilised for surface use. Popular HDPE irrigation pipe for Southeast Asia, Africa and the Middle East — supplied PN6 to PN16, DN16 to DN630.
- HDPE Irrigation Coil Pipe — 100/150/200 m Roll
- HDPE Irrigation Pipe — Blue Striped Straight
- HDPE Striped Irrigation Pipe — Detail
- Blue-Stripe HDPE Irrigation Coil — Bulk
- HDPE Drip Irrigation Lateral with Inline Emitters
- HDPE Drip Lateral — Field Installation
- Raw Materials
- PE100 / PE4710 / PE100RC from Borealis, SABIC, Sinopec, PetroChina
- Diameter Range
- DN20 – DN800 mm
- Pressure Rating
- PN4 – PN16
- Standards
- ISO 4427
- Color
- Black with blue stripe / custom
- Length
- 5.8 m / 11.8 m straight (custom)
- Coil Length
- 100 m / 150 m / 200 m coils
- Applications
- Drip, sprinkler, hydroponic, fertigation, micro-sprinkler, fog & recirculating systems
Product Description
HDPE Irrigation Pipe is a flexible PE100 / PE100RC / PE4710 pressure pipe designed for sprinkler, drip and centre-pivot irrigation systems. It cuts water consumption by up to 60 % compared with flood irrigation and is supplied in long coils for fast unrolling and installation.
Advantages and Characteristics
1. Long coils (100 / 150 / 200 m) reduce joint count and field welds.
2. UV-stabilised black with blue stripe for above-ground exposure.
3. Withstands water hammer and freeze-thaw cycles without cracking.
4. Compatible with quick-connect fittings and pressure-compensated drip emitters.
5. Service life over 50 years even in saline or acidic groundwater.
Typical Applications
1. Drip-irrigation laterals for orchards, vineyards and row crops.
2. Sprinkler-irrigation main lines for fields and pastures.
3. Centre-pivot and linear-move irrigation feeders.
4. Greenhouse fertigation and water-treatment circuits.
5. Landscape and parks irrigation networks.
Datasheet
ISO 4427 — Wall Thickness by SDR (mm)
| Nominal SizeDN (mm) | SDR 7.4 / PN25Min Wall (mm) | SDR 9 / PN20Min Wall (mm) | SDR 11 / PN16Min Wall (mm) | SDR 13.6 / PN12.5Min Wall (mm) | SDR 17 / PN10Min Wall (mm) | SDR 26 / PN6Min Wall (mm) |
|---|---|---|---|---|---|---|
| 20 | 3.0 | 2.3 | — | — | — | — |
| 25 | 3.5 | 3.0 | 2.3 | — | — | — |
| 32 | 4.4 | 3.6 | 3.0 | 2.3 | — | — |
| 40 | 5.5 | 4.5 | 3.7 | 3.0 | 2.4 | — |
| 50 | 6.9 | 5.6 | 4.6 | 3.7 | 3.0 | 2.0 |
| 63 | 8.6 | 7.1 | 5.8 | 4.7 | 3.8 | 2.5 |
| 75 | 10.3 | 8.4 | 6.8 | 5.6 | 4.5 | 2.9 |
| 90 | 12.3 | 10.1 | 8.2 | 6.7 | 5.4 | 3.5 |
| 110 | 15.1 | 12.3 | 10.0 | 8.1 | 6.6 | 4.2 |
| 125 | 17.1 | 14.0 | 11.4 | 9.2 | 7.4 | 4.8 |
| 140 | 19.2 | 15.7 | 12.7 | 10.3 | 8.3 | 5.4 |
| 160 | 21.9 | 17.9 | 14.6 | 11.8 | 9.5 | 6.2 |
| 180 | 24.6 | 20.1 | 16.4 | 13.3 | 10.7 | 6.9 |
| 200 | 27.4 | 22.4 | 18.2 | 14.7 | 11.9 | 7.7 |
| 225 | 30.8 | 25.2 | 20.5 | 16.6 | 13.4 | 8.6 |
| 250 | 34.2 | 27.9 | 22.7 | 18.4 | 14.8 | 9.6 |
| 280 | 38.3 | 31.3 | 25.4 | 20.6 | 16.6 | 10.7 |
| 315 | 43.1 | 35.2 | 28.6 | 23.2 | 18.7 | 12.1 |
| 355 | 48.5 | 39.7 | 32.2 | 26.1 | 21.1 | 13.6 |
| 400 | 54.7 | 44.7 | 36.3 | 29.4 | 23.7 | 15.3 |
| 450 | 61.5 | 50.3 | 40.9 | 33.1 | 26.7 | 17.2 |
| 500 | 68.3 | 55.8 | 45.4 | 36.8 | 29.7 | 19.1 |
| 560 | 76.5 | 62.5 | 50.8 | 41.2 | 33.2 | 21.4 |
| 630 | 86.1 | 70.3 | 57.2 | 46.3 | 37.4 | 24.1 |
| 710 | — | 79.3 | 64.5 | 52.2 | 42.1 | 27.2 |
| 800 | — | 89.3 | 72.6 | 58.8 | 47.4 | 30.6 |
| 900 | — | — | 81.7 | 66.2 | 53.3 | 34.4 |
| 1000 | — | — | 90.2 | 73.5 | 59.3 | 38.2 |
| 1200 | — | — | — | 88.2 | 71.1 | 45.9 |
International Certifications & Compliance
Our HDPE, PVC and PPR products are independently tested and certified to international standards for drinking water safety, quality management and product compliance.
CE / ISO 9001
ISO 9001 quality management system
WRAS
UK drinking water approval
NSF 61
NSF/ANSI 61 drinking water safety (USA)
Global Projects Powered by Primepoly
From municipal water mains and mining slurry lines to fire protection risers and agricultural drip irrigation — Primepoly HDPE, PVC and PPR piping systems keep fluids flowing safely across more than 40 countries.
Municipal Potable Water Trunk Main
DN1200 HDPE PE100 · 18 km
High-Rise Fire Protection Riser
DN150 HDPE · 42 floors
Open-Pit Mine Dewatering Line
DN800 SRTP · 6 km
Urban Gas Distribution Network
DN110 / DN225 HDPE SDR11
Drip Irrigation Backbone
DN63 - DN315 HDPE · 1,200 ha
Industrial Park Chilled Water
DN400 PE100 · PN10
HDPE Irrigation Pipe — Drip, Sprinkler & Buried Mains — used in these projects
HDPE Irrigation Pipe — Drip, Sprinkler & Buried Mains — recommended applications
Frequently Asked Questions
What is the minimum order quantity (MOQ) for HDPE / PVC pipe?
Standard MOQ varies by product — generally 1 ton for HDPE pipe, 500 kg for PVC pipe, and one full container for export orders. Custom MOQ is available for sample / pilot projects — contact our sales team for confirmation.
What is the typical lead time?
For stocked sizes, 7–10 days from order confirmation; for custom OD / SDR / colour, 25–35 days. Production capacity exceeds 2,000 t/month — large project orders are scheduled in batches.
Which certifications does Primepoly hold?
ISO 9001, ISO 4427, AS/NZS 4130, ASTM F714, AWWA C906, WRAS and NSF 61. Documentation accompanies every shipment, and third-party inspection (SGS / BV) is welcome at the buyer's request.
Do you offer OEM and private-label manufacturing?
Yes — we manufacture pipes and fittings to customer-specified OD, SDR, length, colour, marking and packaging. MOQ for OEM orders typically starts at 5 tons or one full container.
How are pipes packaged for export shipping?
Pipes are bundled with PE film / steel strap and stowed by length: short pipes (≤6 m) ship in 20'/40' containers; long pipes (>12 m) ship by break-bulk vessel or flat rack. Coil rolls are shrink-wrapped and palletised. Free OBL with shipping documents.
Contact Us
Our friendly customer service team is here to help with quotations, technical consulting and custom manufacturing enquiries. We reply within 24 hours.
- Tel+852 9562 2873
- Emailsales@primepolypipes.com
- AddressRoom 1313, 13/F, Meisheng Center (Office Tower), No. 33 Jinshui East Road, Zhengzhou Area (Zhengdong), Henan Pilot Free Trade Zone, Zhengzhou, Henan 450000, China
Leave a Message
Our friendly customer service team is here to help with quotations, technical consulting and custom manufacturing enquiries. We reply within 24 hours.